Friday 3rd May 2018

20180503_1505143rd may 2018 (12)3rd may 2018 (13)3rd may 2018 (14)3rd may 2018 (15)3rd may 2018 (16)3rd may 2018 (1)3rd may 2018 (2)3rd may 2018 (3)3rd may 2018 (4)3rd may 2018 (5)3rd may 2018 (6)3rd may 2018 (11)3rd may 2018 (10)3rd may 2018 (8)20180503_124406IMG_037820180503_150119

The end of an age as the Belfast roof barn comes down.

A Belfast truss was a timber roof structure apparently designed and first used for industrial scale sheds in the town of Belfast, Ireland in the 1860’s. Such trusses were originally designed for use with tarred roofing felt laid onto timber boarding.

The Belfast Truss consists of a lower horizontal member (tie-beam) and a curved upper member (bow) connecting at each extremity. The two members are also connected repeatedly with light section lattices.

The segmental curve of the upper member commonly has a radius of 1/2 of the span of the truss. The setting out of the radiating lines of the lattice was commonly based on two Setting Out Points placed at a distance of 3/4 of the span below the ends of the tie beam. The lattices are set out on radial lines from each setting out point to meet at the arched upper member at equal centres to support the purlins.

The three basic components of the Belfast truss are assembled as follows:

The top arched ‘bow’ comprises two members on each side of the lattice bars;
The ‘tie-beam’ consists of two boards sandwiching the lattice bars; and
The ‘lattice bars’ cross between the tie-beam and the bow with a packing piece at the tie-beam to sandwich the lattice between the two boards of the tie beam.
The resultant shape of a Belfast Truss is that of a bow-strung girder which is a close approximation to the bending moment diagram for evenly distributed load. It is considered an economical type of truss as it makes use of material of small section, in reasonably short lengths with nailed joints. It has been suggested that the roof form developed partly in an attempt to utilize the short off-cuts from the timber trade.

The ends of the bow are anchored to the tie-beam by gusset boards and a metal strap. The purlins spanned between the trusses and supported curved roof covering.

When making the Belfast Truss, the lattice bar bracings are laid and nailed face to face, with spaces at the bottom cord. However each layer is pinched in by half of its thickness so that the braces lay side by side at the top bow. A contractor would easily set out and fabricate such a truss on site.

The speed of construction of the Belfast roof, had great advantages over other forms of roof construction. In America the Belfast roof was also known as the ‘Build Fast’ roof. The speed of construction was due to the fact that it was nailed and prepared on the ground and then hoisted up into position.

IMG_0383IMG_0384IMG_0385IMG_0386IMG_0387IMG_0390IMG_0391IMG_0407IMG_0406IMG_0409IMG_0412IMG_0413

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: